Mataji Electronics

A 40-pin IC base (also known as a DIP socket for 40-pin dual in-line packages) is an electromechanical connector designed to hold and connect 40-pin integrated circuits (ICs) in a secure yet removable way. It’s widely used in electronics prototyping, development boards, and final assembly to prevent heat damage during soldering, enable easy replacement of ICs, and protect PCB tracks from wear and tear due to repeated insertion/removal of chips.

• Protects ICs from heat damage during soldering.

• Allows easy removal or replacement of ICs.

• Prevents wear on PCB tracks from frequent IC handling.

• Useful in prototyping and testing.

• Allows swapping of programmable chips like microcontrollers or EPROMs.

• Typically made from heat-resistant plastic (like polyamide or polyester).

• Has two rows of pin sockets with standardized spacing.

• Metal alloy (often phosphor bronze or copper with tin/nickel plating).

• Leaf-type or machined pin contacts for durability and reliable grip.

• Standard 0.1" (2.54 mm) spacing between adjacent pins.

• 0.6" (15.24 mm) row spacing between the two rows (center-to-center).

• Through-hole: Pins are inserted into PCB holes and soldered underneath.

A microcontroller is a small integrated circuit, usually composed of a central processing unit, memory, parallel input and output interfaces, a clock generator, one or more analog-to-digital converters, and serial communication interfaces.

PIC is an abbreviation of Peripheral Interface Controller. It is the smallest microcontroller and are programmed to execute large number of operations. Salient features of PIC 18: • It has RISC Architecture

The MC14584BCP is a hex Schmitt trigger IC manufactured by ON Semiconductor. It's a CMOS device containing six independent inverting Schmitt trigger circuits within a single package. This component is designed for applications requiring noise immunity and the ability to "square up" slowly changing waveforms. 

A microcontroller unit (MCU) is essentially a small computer on a single chip. It is designed to manage specific tasks within an embedded system without requiring a complex operating system

The Nuvoton N76E003AT20 is a high-performance, low-power 8-bit microcontroller based on the 1T 8051 core architecture. It's known for its wide operating voltage range (2.4V to 5.5V), high noise immunity, and rich set of peripherals. This microcontroller is particularly well-suited for applications demanding efficiency, adaptability, and cost-effectiveness

The dsPIC30F2010/SP is a 16-bit digital signal controller (DSC) produced by Microchip Technology. This series combines the functionalities of a microcontroller (MCU) with the computational power of a digital signal processor (DSP) in a single core. This makes it well-suited for applications requiring high-speed calculations, real-time signal processing, and flexible control capabilities

N76S003AQ20 is an embedded Flash type 1T 8051-based microcontroller manufactured by Nuvoton. It features 18 KB Flash ROM, configurable Data Flash, and 1 KB SRAM. It operates over a wide voltage range (2.4V to 5.5V) and temperature range (-40℃ to 105℃).

• Part Number: PIC16F1508-I/SO

• Manufacturer: Microchip Technology

• Device Type: 8-bit microcontroller

• Core: PIC® Mid-Range Enhanced (Enhanced Mid-Range)

• Package: SOIC-14 (Small Outline IC, 14 pins)

• Temperature Range: -40°C to +85°C (Industrial, “I” suffix)

• Operating Voltage: 1.8V to 5.5V

• Flash Program Memory: 4 KB

• RAM: 256 bytes

• EEPROM: 256 bytes (for non-volatile data storage)

• Core Speed: Up to 20 MHz (via internal or external oscillator)

• Instruction Execution: 49 instructions (RISC architecture)

• Single-cycle instructions: Most execute in 1 or 2 clock cycles

• I/O Pins: 12 (depending on function multiplexing)

• Timers: 3 (Timer0, Timer1, Timer2)

• ADC:

  • Resolution: 10-bit

  • Channels: 12 channels (depending on package pinout)

• Comparator Module: 2 analog comparators

• PWM: 2 Enhanced PWM (EPWM) modules

• CWG: Complementary Waveform Generator

• CLC: Configurable Logic Cell (2 modules)

• NCO: Numerically Controlled Oscillator

• Fixed Voltage Reference (FVR)

• Zero-Cross Detect (ZCD)

• EUSART: 1 (Enhanced Universal Synchronous/Asynchronous Receiver/Transmitter)

• MSSP: Supports SPI and I²C protocols

• XLP Technology: Extreme Low Power operation

• Watchdog Timer

• Brown-Out Reset (BOR)

• Power-On Reset (POR)

• In-Circuit Serial Programming™ (ICSP)

• In-Circuit Debugging

• Battery-powered devices

• Lighting and motor control

• Consumer electronics

• General-purpose embedded control

• IoT edge devices

A Leadless Ceramic Chip Carrier (LCCC) is a type of surface mount integrated circuit (IC) package, typically made of ceramic, that connects to a printed circuit board (PCB) via castellations (metal pads) on its edges, rather than having leads or pins. 

The PIC18F4520 is a high-performance, 8-bit microcontroller (MCU) from Microchip's PIC18 family, featuring nanoWatt technology for low power consumption. It is widely used in automation and embedded systems due to its rich peripheral set and high-speed operation.

The Microchip PIC16F84A-04 is an 8-bit, Flash/EEPROM-based microcontroller from the PIC16 family, known for its ease of programming and use in prototyping and industrial applications. The "-04" in the part number indicates a maximum clock frequency of 4 MHz and an operating temperature range of 0°C to 70°C

The Microchip MIC29302WU is a 3A low-dropout (LDO) adjustable voltage regulator designed for high-current applications in harsh environments like automotive electronics. It features over-current, over-temperature, and reverse polarity protection.

The Microchip MIC5842YWM is an 8-stage, high-voltage, high-current latched driver in an 18-pin SOIC wide package, suitable for driving inductive loads like lamps, relays, and solenoids. It features bipolar current-sink Darlington output drivers and low-power CMOS logic