Mataji Electronics

The FR207 is a fast-recovery rectifier diode, often used in power supplies, converters, and other high-speed switching applications. It is designed for rectifying alternating current (AC) to direct current (DC) with high efficiency. 

A photodiode is a semiconductor device that functions as a light sensor, converting incident light (photons) into an electrical current. 

Zener diodes are used to generate low-power stabilized supply rails from higher voltages and to provide reference voltages for circuits, especially stabilized power supplies. They are also used to protect circuits from overvoltage, especially electrostatic discharge.

The schottky diode is a type of metal – semiconductor junction diode, which is also known as hot-carrier diode, low voltage diode or schottky barrier diode. The schottky diode is formed by the junction of a semiconductor with a metal. Schottky diode offers fast switching action and has a low forward voltage drop.

The 1N5822 is a Schottky barrier diode, a type of rectifier known for its extremely fast switching speeds and very low forward voltage drop. These characteristics make it highly efficient for a variety of power conversion and switching applications.

The 1N5408 is a standard recovery rectifier diode, widely used for converting alternating current (AC) into direct current (DC). The designation "LRM" often indicates a specific packaging or lead configuration for certain manufacturers, though the core component remains the same.

The 107 diode refers to the FR107, a common fast-recovery rectifier diode. It is a two-terminal electronic component that allows current to flow primarily in one direction, restricting it in the opposite direction. The "FR" prefix indicates "fast recovery," which is its defining feature

A laser diode is a semiconductor device that produces a concentrated, coherent beam of light through the process of stimulated emission. Unlike a conventional light-emitting diode (LED), which emits incoherent light in many directions, a laser diode generates a narrow, focused beam at a single, consistent wavelength.

The 1N5401 is a common, general-purpose silicon rectifier diode used for converting AC power to DC. As a member of the 1N54xx family, its key ratings are a maximum average rectified forward current of 3A and a maximum repetitive peak reverse voltage of 100V.

A PIN diode is a diode with a wide, undoped intrinsic semiconductor region between a p-type semiconductor and an n-type semiconductor region. The p-type and n-type regions are typically heavily doped because they are used for ohmic contacts. PIN diode.

A tunnel diode, also known as an Esaki diode, is a type of semiconductor diode that exhibits negative resistance due to the quantum mechanical effect of tunneling. This negative resistance is a key characteristic that allows for high-speed switching and other unique applications.

A step recovery diode (SRD), also known as a snap-off or charge-storage diode, is a semiconductor device that generates extremely short pulses by rapidly releasing stored charge when switching from forward to reverse bias. 

The 5399 diode is a commonly known reference for the 1N5399 general-purpose rectifier diode. It is an axial-leaded, standard recovery diode used for converting AC power to DC in a variety of electronic applications.

A varactor diode is a semiconductor device whose capacitance can be changed by varying the reverse voltage applied across it. It is also known as a varicap, voltage-variable capacitor (VVC), or tuning diode. Unlike a standard diode, which is used for current rectification, a varactor is designed to exploit the voltage-dependent capacitance of its depletion region