Mataji Electronics

The IEC 62196 Type 2 connector is the standard for AC charging electric vehicles (EVs) in Europe and many other regions around the world. It is a 7-pin, circular connector with a flat top edge, also colloquially known as the Mennekes connector after its original designer.

In India, the standard 3-pin plugs are of Type D. These plugs have three round pins in a triangular pattern and are used for grounded, or Class I, appliances. India uses a supply voltage of 230V at 50Hz.

FRC female connector is an Insulation Displacement Connector (IDC) designed to terminate a flat ribbon cable (FRC). FRC connectors are commonly used for interconnecting internal peripherals within computers, such as hard drives and floppy drives, as well as in other electronic equipment. 

A male right-angle FRC connector is a type of electrical connector used to terminate a flat ribbon cable (FRC) and mount it to a printed circuit board (PCB). The "male" designation refers to the plug side of the connector, which has exposed pins. The "right-angle" orientation means that the pins are bent at a 90-degree angle to the body of the connector, allowing the ribbon cable to exit parallel to the PCB surface. 

FRC (Flat Ribbon Cable) male connectors with a locking mechanism, also known as box headers, are widely used for robust, secure connections in electronics. The locking feature, usually a latch on the sides, prevents accidental disconnection from the mating female IDC socket. These connectors are commonly available with pitches of 2.54mm, 2mm, and 1.27mm. 

The SAE J1772 connector, also known as the Type 1 or J-plug, is the standard for Level 1 and Level 2 AC charging in North America and Japan. It features a five-pin design and is compatible with nearly all non-Tesla electric vehicles. 

A "mono plug ring type metal" is a metal-bodied 1/4-inch (6.35mm) TS (Tip-Sleeve) audio connector used to transmit a single, unbalanced mono audio signal. The metal body, often nickel or gold-plated brass, provides durability and better shielding. The term "ring type" may refer to an insulation ring used in the plug's internal construction or simply an alternative name for the common TS plug used for mono signals.